Connections - Silvercrest SBW 60 A1 Bedienungs- Und Sicherheitshinweise

Note:
• Installation must be carried out by qualified personnel only. Incorrect assembly can result in severe
personal injury and property damage (if you intend to install this product yourself, you must check
for installations such as electrical wiring and plumbing that may be buried inside the wall). It is the
installer's responsibility to verify that the wall will safely support the total load of the unit and wall
brackets.
• Additional tools (not included) are required for the installation.
• Do not overtighten screws.
• Keep this instruction manual for future reference.
• Use an electronic stud finder to check the wall type before drilling and mounting.

Connections

Connect to HDMI socket
Use HDMI to connect the Soundbar to AV equipment and TV:
ARC (Audio Return Channel)
The ARC (Audio Return Channel) function allows
you to send audio from your ARC- compliant TV to
your sound bar through a single HDMI connection.
To enjoy the ARC function, please ensure your TV
is both HDMI-CEC and ARC compliant and set up
accordingly. When correctly set up, you can use your
TV remote control to adjust the volume output (VOL
+/VOL- and MUTE) of the sound bar.
Connect the HDMI cable from the unit's HDMI
(ARC) socket to the HDMI (ARC) socket on your ARC
compliant TV. Then press the remote control to select
HDMI ARC.
Note:
• Your TV must support the HDMI-CEC and ARC function. HDMI-CEC and ARC must be set to On.
• The setting method of HDMI-CEC and ARC may differ depending on the TV. For details about ARC
function, please refer to your TV owner's manual.
• Only HDMI 1.4 cables can support the ARC function.
GB/IE 35