Control Panel - Merrychef Microcook TA1725 Anleitung

CONTROL PANEL

MULTI-STAGE
INDICATOR/ PROGRAM DISPLAY
PROGRAM PAD
PROGRAM DISPLAY
MULTI-STAGE INDICATOR
PROGRAM DISPLAYMULTI-STAGE INDICATOR
The program display indicates the program number
selected. 'P' indicates programming Indicates stage in
multi-stage program.
POWER PADS
The Power Pads select 100% and 50% (Microcook TA1725
only) Microwave power. A light will indicate when in use.
HOT AIR ONLY (Microcook TA1925 only)
This is used when foods only require browning
( no microwave ). A light will indicate when in use.
TURBO PAD
Turboaire mode combines microwave energy with
instantaneous heat in the form of hot air. A light will indicate
when in use.
TIME DISPLAY & ERROR DISPLAY
Shows the time set in minutes and seconds and counts
down in 1 second steps during a cooking
cycle. Also displays error messages.
( See PROBLEM SOLVING )
POWER PADS, TA1925
100% Microwave, Convection only & Turbo
TIME/PROGRAM SELECT PADS
POWER PADS, TA1725
50%, 100% Microwave & Turbo
CANCEL/ CALLBACK 'C' PAD
Cancels all timed cooking cycles, pre-programmed
operations and stops the microwave energy. This pad will
also cancel any incorrect operations. It will not erase
programs. It can also be used to view the details of stored
programs. ( see CALL BACK )
TIME/PROGRAM SELECT PADS
These pads are used for setting the cooking time in 1
second steps to a maximum of 30 minutes.
They are also used for programmes from 1-9.
PROGRAM PAD
Activates multi-stage cooking and programming.
9
TIME/ERROR DISPLAY
CANCEL PAD
TIME/ERROR DISPLAY