Using The Led Torch; Troubleshooting - Silvercrest IAN 286383 Bedienungs- Und Sicherheitshinweise

Using the LED torch

To switch on the light, press and hold the
Display / LED button
the product about 2 seconds.
Press and hold the Display / LED button
again to switch the light OFF again.
5

Troubleshooting

= Problem
= Cause
= Solution
The power bank
charged.
It may be that the power bank is not
connected properly.
Check that it is connected.
A connected device is not being
charged.
The battery is drained.
Charge the battery.
The device is not connected.
Check that it is connected.
Lightly press the Display / LED button
to begin the charging process.
on the side of
5
is not being
6
GB/CY
5
17