Operation And Use; Charging The Power Bank - Silvercrest IAN 286383 Bedienungs- Und Sicherheitshinweise

products in situations which may be
hazardous such as at petrol stations,
airports, hospitals, etc.
please be noticed that the product must
not be covered.
beam.
light directly to persons and animals.

Operation and use

Charging the power bank

The built-in rechargeable battery must be
fully charged before using the product. The
required charging time for the power bank
depends on the charging source and its
output power (max. 5 V/2 A).
To charge the power bank
power supplies with an output voltage of
5 V and an output current of at least 2 A.
Connect the USB cable
USB Input
Connect the other end of the USB
cable
supply (not included in the scope of
delivery) (see fig. A).
14 GB/IE/NI
During charging process,
Do not look into the light
Do not point this LED
of the power bank
9
(USB Type A) to a USB power
7
only use
6
with the Micro
7
6
6
.