Eib - ABB Eib Delta Zähler Dz+ Montage- Und Bedienungsanleitung

EIB commissioning
The assignment of the physical addresses, group addresses and
parameter settings is carried out using the ETS program
(EIB Tool Software).
IMPORTANT:
Using the ETS2 V1.1 without the service release B results in a wrong
programming of this device.
Therefore the service release B or a higher ETS version (e.g. ETS2V1.3)
has to be installed on the PC prior to programming the device. Informa-
tion to the ETS is available on the internet www.eiba.com.
A detailed description of the available EIB application software and
parameter settings can be found in the "Product Manual
EIB Delta-Meter Plus".
The current transformer (ct) ratio and the voltage transformer (vt / ut) ratio
only influence the values shown on the LCD Display of the meter. All
values transmitted via EIB are secondary values without ct/vt ratio used.
53