Replacing / Mounting The Activated Charcoal Filter; Changing The Lamp - KKT KOLBE ANGOLO Benutzerhandbuch

Care and cleaning
• Allow the filter to dry thoroughly and
carefully replace it in the extractor
hood.
• When refitting the filters, make sure
that the handle is visible on the
outside.
!
• When cleaning metal grease filters
take care not to bend them or to
damage the mesh.
• Avoid using alkaline dishwasher
cleaning agents (ph value over 7).
• Frequent cleaning or the use of
aggressive cleaning agents can
cause color changes of the metal
surface. These have no influence
on the filter function and are not a
reason for complaint.
6.3 Replacing / Mounting the
activated charcoal filter
Original Carbon filter
for this model: K606
• The filter is not washable and can-
not be regenerated.
It must be replaced approximately
every 4 months of operation, or
more frequently for particularly
heavy usage.
• Remove the metal grease filters.
• Remove the saturated activated
carbon filter by releasing the fixing
hooks.
• Fit the new filter by hooking it into
its seating.
• Refit the metal grease filters.

6.4 Changing the lamp

!
• When changing a lamp, make sure
that the new lamp does not have a
higher wattage than of the original.
• Disconnect the power supply befo-
re changing the lamps. The lamp
can be changed directly.
37