Installation; Preparation Of Wall Mounting; Fitting The Hood Canopy - KKT KOLBE ANGOLO Benutzerhandbuch

Installation

3. Installation

3.1 Preparation of wall mounting

12
13
12
13
• Rest the bracket (11.2) as indicated
1-2 mm from the ceiling or top limit.
• Mark the centres of the bores in the
bracket.
• Rest the bracket (11.2) as indicated
X mm under the first bracket
(X = height of the top chimney
provided).
• Mark the centres of the bores in the
bracket.
• Rest the hood coupling support
(11.1) as indicated 1004 mm above
the cooker top, ensuring that the
fixing bores are equidistant from
the corner of the wall.
• Mark the centres of the bores in the
support.
30
11.2
11.1
• Drill the points marked with a
ø 8 mm drill bit.
1-2 • Insert the plugs (12) into the holes.
• Draw a horizontal line on the Wall
668 mm above the Cooker Top.

3.2 Fitting the hood canopy

• Before hooking up the hood canopy,
lock the 2 screws (21.2) located at
the hood canopy connection points.
• Hook up the hood canopy to the
screws (21.1) taking care to ensure
that the safety brackets (22), fixed
to the wall, enter the Side Housings
provided.
• Tighten the support Screws (21.1)
until they lock.
• Adjust Screws (21.2) to level the
hood canopy.
21.1
21.2
22