Use As A Recirculation Hood; Mounting The Carbon Filter; Electrical Connection - KKT KOLBE BOX 400 S/W Benutzerhandbuch

Installation / Technical details

9.4 Use as a recirculation hood

This appliance is factory-provided for re-
circulating air operation. For this check
inside the hood that the carbon filters
are attached on the right and left of the
motor unit.

9.5 Mounting the carbon filter

• Remove the metal grease filter.
• The carbon filter is mounted in two
parts to the right and left of the motor.
Check whether the teeth correspond
to the direction of the rotation of the
respective side.
• Turn the activated carbon filter onto
the motor housing (usually clockwise).
• Reinsert the metal filter.
(Illustrations may vary)
56

9.6 Electrical connection

!
Do not connect the appliance to the
power supply until it has been properly
installed.
!
Never install the appliance if the data on
the rating plate (V) does not agree with
your supply voltage.
You will find the rating plate inside the
appliance, behind the grease filter.
If the cooker hood has a standard plug,
connect it to an easily accessible stan-
dard socket.
If the appliance is not fitted with a con-
nector plug, a two-pole switch, confor-
ming to standards with a minimum open
contact gap of 3 mm is to be installed
by an authorized tradesman in an easily
accessible location.