Installing And Aligning The Optional Lcd Display With Control Buttons - ABB TTF350 Inbetriebnahmeanleitung

Installation
3.2

Installing and aligning the optional LCD display with control buttons

Fig. 3
1 Front view
2 Side view
The LCD display is attached to the housing of the TTF350 transmitter.
1 Unscrew the housing cover for the transmitter.
2. Carefully remove the LCD display from the inset for the transmitter. The LCD display is held
firmly in place. You might have to use the tip of a screwdriver to pry loose the LCD display.
Avoid mechanical damage.
3. No tools are required to insert the LCD display, which can be mounted in 4 positions at 90°
degree intervals to ensure the display is mounted properly and readable.
4. Screw on the housing cover for the transmitter.
10 - EN
1
2
TTF350
3
3 Rear view of LCD display / plug positions
A00182
CI/TTF350-X1