Frequently Asked Questions & Troubleshooting - INVENTOR P3F-50LBS Bedienungsanleitung

10. FREQUENTLY ASKED QUESTIONS
& TROUBLESHOOTING
Are dehumidifiers
costly?
Where should the
dehumidifier be placed
ideally?
Can the filter be
replaced by another
HEPA type filter?
Which is the appropriate
room humidity level?
Why does condensation
persist on windows even
with dehumidifier's use?
Why am I not able to set
the desired humidity
level by use of the
control panel?
16
For about the first month of use, the dehumidifier
operates intensively. This will gradually decrease within
time, since the dehumidifier will have been calibrated in
its working environment. Condensed households may
sometime be significantly expensive to heat. The use of a
dehumidifier may lower energy costs.
For optimal results, it is suggested that the dehumidifier
is placed in a central area. Doors within the household
should be open in order for the dehumidifier to enhance
its operation.
The dehumidifier's filter cannot be replaced by any other
type of filter since it is specifically designed to operate
with this unit.
Maintaining a proper home humidity level is essential
for your well-being and that of your household.
Extreme fluctuations cause adverse effects on both; low
humidity may cause respiratory problems and damage
on wooden doors, windows, and furniture, and make
you vulnerable to electric shocks due to increased
static electricity. On the other hand, high humidity may
promote mold growth, serving as breeding grounds for
various bacteria and resulting in poor health and also
a damaged home. The ideal humidity levels fluctuate
between 45% to 55%.
When the desired humidity level is reached, there is a
possibility of partial humidity formation on windows.
This occurs due to the temperature variation between
the window and the external weather conditions. •
Operating the dehumidifier should significantly reduce
condensation formation on windows.
In order to access manually the humidity t / u you
first need to press the "Mode" button, and have no led
indication on the control panel, hence Cont or Comfort
mode should be off. This will allow you to manually
change the desired humidity level.
EN