INVENTOR P3F-50LBS Bedienungsanleitung Seite 13

2. Continuous draining
Water automatically can be emptied into a floor
drain by attaching the unit with a water hose.
• Remove the plastic plug opposite the unit. Insert the
water hose into the outlet. All connections should be
firmly tight for possible leaks to be avoided.
• The dehumidifier should be placed on a flat surface
in an upright position.
• Lead the water hose towards a suitable drainage
facility and be certain that the water flows naturally.
For correct drainage, make sure the hose stays below
the level of the drain hose outlet.
Caution: water
hose should
never be bend
or twisted!
When the continuous drainage feature is not being used,
remove the drain hose and the drain adaptor from
the drain hose outlet and re- install the plastic cover.
EN
x
13