Fronius Datamanager 2.0 Modbus RTU Benutzerinformation Seite 10

10
S t a n d b y
D A T C O M
U S B
R e l a y
C l o c k
D A T C O M S t a t e
I n v e r t e r N u m b e r
P r o t o c o l T y p e
I n v e r t e r N u m b e r
01
I n v e r t e r N u m b e r
01
I n v e r t e r N u m b e r
01
Use the 'Up' and 'Down' keys to move
3
between the available entries and se-
lect 'DATCOM'.
Press the 'Enter' key
4
Use the 'Up' and 'Down' keys to move
5
between the available entries and se-
lect 'Inverter Number'.
Press the 'Enter' key
6
The current inverter number appears. The
'tens' digit will flash.
Use the 'Up' and 'Down' keys to select
7
a value for the 'tens' digit of the invert-
er number.
Press the 'Enter' key
8
The 'units' digit will flash
Use the 'Up' and 'Down' keys to select
9
a value for the 'units' digit of the in-
verter number.
Press the 'Enter' key
10
The inverter number will flash.
Press the 'Enter' key
11