Cancelling Id Mode - Canon VC-C50i Gebrauchsanleitung

Cancelling ID Mode

<Example> In this example, the selection made in the previous section of the cameras with
ID number 2 is cancelled. The camera LEDs are as shown below.
Check the LEDs on all the adjacent connected cameras to ensure that all the
cameras are receiving the signals from the wireless controller.
NOTE
BRIGHT ZOOM
T
W
HOME
SET/OK CANCEL
1 2 3
AF
4 5 6
MF
∞
7 8 9
0
ON SCREEN Fn ID MENU
ID1
Orange Green
1. Press the i button.
The LEDs on all the adjacent connected cameras blink orange
(at 0.5-second intervals).
ID1
Blinking orange Blinking orange
To cancel ID mode operation, press the c or i button. The
LEDs on all the ID2 cameras turn green and the LEDs on the
other cameras turn orange.
2. Press the 0 button.
The LEDs on all the cameras turn green as for normal operation.
ID1
Green Green
This completes ID mode cancellation. All the cameras will now
respond simultaneously to the signals from the wireless controller.
ID2 ID2
Green
ID2 ID2
Blinking orange
ID2 ID2
Green
ID Mode
ID3
Orange
ID3
Blinking orange
ID3
Green
37