Loading The Batteries Into The Wireless Controller; Operable Range Of The Wireless Controller - Canon VC-C50i Gebrauchsanleitung

Controlling the Camera from the Wireless Controller

Loading the Batteries into the Wireless Controller

The wireless controller requires two AA-type batteries.
1. Remove the battery cover.
2. Insert the batteries.
■ Taking care that the poles (+ and –) are
correctly positioned.
3. Replace the battery cover.
a
WARNING
Observe the following precautions when handling batteries.
Failure to do so could result in the batteries bursting or emitting heat, sparks or
corrosive fluid.
● Do not throw the batteries into a fire, and do not heat, short-circuit or attempt
to disassemble the batteries.
● Do not attempt to recharge the batteries.

Operable Range of the Wireless Controller

Use the wireless controller within the range described below, facing it toward the sensor for
the wireless controller. The operable range of the wireless controller varies depending on the
amount of charge remaining in the batteries and interference from other objects. (This applies
equally to the VC-C50iR.)
90°
20
5 m
(16.4 ft.)
30°
90°
30°