Using The Machine - Stiga C 1.8 ET Gebrauchsanweisung

USING THE MACHINE

7. USING THE MACHINE
WARNING!
that of others:
1) Do not use the machine without reading
the instructions carefully. Become ac­
quainted with the controls and the proper
use of the machine. Learn how to stop the
engine quickly.
2) Only use the machine for the purpose for
which it was designed, that is for "felling,
bucking and delimbing trees with dimensions
suitable for the length of the bar" or wooden
objects with the same characteristics. Any
other use, such as using accessories not
specified in this manual, may be hazardous
and also damage the machine. Examples
of improper use may include, but are not
limited to:
– trimming hedges;
– intaglio carving;
– sectioning pallets, crates and various
packing materials;
– sectioning furniture or other materials
with nails, screws or other metal com­
ponents;
– butchering meat;
– using the machine to lift, move or split
objects;
– using the machine while fastened to fixed
supports.
3) Keep in mind that the operator or user is
re sponsible for accidents or hazards oc­
curring to other people or their property.
4) Always wear suitable clothing when using
the machine. Your dealer can provide
you with all the information on the most
suitable accident­prevention devices to
guarantee your safety. Wear anti­vibration
gloves. All the above­mentioned precau­
tions do not however guarantee the pre­
vention of certain risks – i.e. Raynaud's
phenomenon or Carpal tunnel syndrome.
For operators who use this machine for
prolonged periods, it is therefore recom­
mended to have periodic check­ups on the
hands and fingers.
If any of the above mentioned symptoms
should appear, please contact a physician
immediately.
5) Mow only in daylight or good artificial light.
6) Take utmost care when working near me­
tal fences
7) Keep the chain away from the electric ca­
ble. Use the cable clamp to prevent the
extension lead from disconnecting acci­
dentally. Make sure it is connected to the
socket without being forced. Never touch
a live electric cable if it is poorly insulated.
For personal safety and
If the extension lead gets damaged during
use, do not touch the cable and unplug the
extension lead immediately.
8) Take care not to hit the bar hard against
foreign objects or flying debris caused by
the movement of the chain.
9) Stop the engine and unplug the machine
from the mains:
– whenever you leave the machine un­
attended;
– before cleaning, checking or servicing
the machine;
– after striking a foreign object. Inspect
the machine for any damage and make
repairs before restarting it again;
– if the machine begins to abnormally vi­
brate (Immediate look for the cause of
the vibrations and take for necessary
controls at a Specialised Centre).
– when the machine is not in use.
IMPORTANT
Always remember that an
incorrectly used electric chain-saw may disturb
others and have a serious impact on the environ­
ment.
To respect people and the environment:
– Avoid using the machine in environments or at
times of the day when it may disturb others.
– S crupulously comply with local regulations and
provisions for the disposal of waste materials
after sawing.
– S crupulously comply with local regulations and
provisions for the disposal of oils, damaged
parts or any elements which have a strong im­
pact on the environment.
– A certain amount of chain lubricating oil is re le­
ased into the environment when the machine is
running, so only use biodegradable oils made
specifically for this use.
– T o avoid the risk of fire, do not leave the ma-
chi n e with the engine hot on leaves or dry grass.
WARNING!
use the machine for felling and delimbing.
EN
It takes specific training to
9