Beko CEG5311X Bedienungsanleitung Seite 17

5
Cleaning
2
1
Pull down the service door and remove it.
When lights up stably, it indicates that the brewer is missing / installed improperly. When
is flashing, it indicates that the service door is missing/installed improperly.
5.2 Self-Cleaning
WARNING: Please wait for finishing the self cleaning process and then switch off the
machine.
When is flashing, it indicates that the appliance needs to undergo self-cleaning. The appliance
will remain in the best condition if this function is performed at least once a month or more regularly
depending on the hardness of water used. It is also suggested that to
1. Fully fill the water tank.
2. Adding one pack of cleaning agent included in the box to the water tank.
WARNING: Do not use vinegar or other cleaning agent to do self-cleaning of this
appliance. The cleaning agent might damage the appliance.
3. Plug in the appliance.
4. Place a sufficient large container under the coffee spout.
5. In standby condition, press and hold
will be heard with
6. Press strong espresso button to confirm undergoing the self-cleaning process. To resume back to
the standby condition, press .
Fully Automatic Coffee Machine / User Manual
Press the release knob.
and strong espresso button
and strong espresso button
Remove the brewer. Wash the brewer
with fresh water. Dry the brewer after-
wards.
for 5 seconds. A beep sound
will be flashing.
17 / EN