Buttons And Functions - Cocraft HD400 Original Bedienungsanleitung

• Make sure not to remove or damage the safety symbols and warnings found on
the distance meter.
• Never try to open the housing, repair or modify the distance meter in any way.
• Only use accessories that are recommended by the manufacturer or retailer.
• Never use the distance meter where flammable or explosive substances are used
or stored.
• Do not use the distance meter on or near highly reflective surfaces since the laser
beam can be reflected back into your own or someone else's eyes.
• Keep the laser distance meter out of children's reach.
• Labelling: Subject to change
(drawings, descriptions and
technical data) without prior notice.

Buttons and functions

Laser Distance Meter
1. LCD display
2. [ ] Turn on the laser distance meter,
perform measurement
3. [ ± ] Add to or subtract from
measured value
4. [ OFF, CLEAR ] Switch off, Delete
5. [ ] Change measuring function:
Area, volume or Pythagoras' theorem
6. [ ] Change measuring reference,
change unit (mm/inches)
1
2
3
4
6
5
6