Care And Maintenance; Troubleshooting Guide - Cocraft LC50-SP Bedienungsanleitung

Care and maintenance

• Always switch the laser level off before cleaning it, moving it, and after you have
finished levelling.
• Clean the laser using a lightly moistened cloth. Use only mild cleaning agents,
never solvents or corrosive chemicals.
• Replace the batteries if the projected laser line becomes unclear.
• Always handle the laser level with the care of the precision optical instrument that it is.
• Do not expose the laser level to impacts, vibrations, extremely high or low
temperatures.
• Remove the batteries and store the laser level in a dry, dust-free environment, out
of children's reach whenever it is not to be used for an extended period.

Troubleshooting guide

The laser will not
switch on.
The manual levelling
mode will not activate.
The laser line flashes
and the laser level emits
an audible signal during
self-levelling.
The laser line is not very
visible.
Responsible disposal
This symbol indicates that this product should not be disposed of
with general household waste. This applies throughout the entire EU.
In order to prevent any harm to the environment or health hazards
caused by incorrect waste disposal, the product must be handed in
for recycling so that the material can be disposed of in a responsible
manner. When recycling your product, take it to your local collection
facility or contact the place of purchase. They will ensure that
the product is disposed of in an environmentally sound manner.
Check the capacity of the batteries and make sure
that they are inserted correctly. Follow the markings on
the bottom of the battery compartment.
The power switch must be set to OFF in order for
the manual levelling mode to be activated.
The laser level is at too much of an angle (more than 5°),
place it on a level surface.
• Check the batteries and replace if necessary.
• Check the laser window; clean it with a soft cloth if
necessary.
• Ambient light level too high.
6