Cocraft HD400 Original Bedienungsanleitung Seite 9

Selecting the unit for measuring distance
Hold down [ ] for two seconds to display the measurement in millimetres or inches.
Instantaneous distance measurement
Note: Measuring errors may occur when measuring against colourless liquids, glass,
soft plastic, or semi-transparent or high-gloss surfaces. Against very dark surfaces
the time taken to display the measurement may increase.
1. Press [ ] to turn on
the laser distance meter.
Continuous distance measurement
1. Press [ ] to turn on the laser distance meter.
2. Hold down [ ] for two seconds.
4. Continuous distance measurement will be performed and the display will show
the current distance.
5. Press [ ] to end continuous distance measurement.
2. Aim the laser dot at
the desired surface.
3. Aim the laser dot at the desired
surface.
9
3. Press [ ] to display
the measurement.