LCD display
7. Battery status
8. Surface and volume measurement
9. Selected laser distance meter
reference point
10. Info
11. Shows the highest and lowest
values during continuous
measurement
12. Addition/Subtraction
13. Indicates measurement according
to Pythagoras' theorem
14. Displays chosen unit
15. Current measurement
Operation
Batteries
Open the battery compartment and insert
2 × AAA/LR03 batteries. Note the polarity
markings at the bottom of the battery
holder to ensure correct insertion.
Turning the device on
Press [
].
Turning the device off
Hold down [ OFF, CLEAR ] for two
seconds.
Note: Following a period of inactivity the laser beam will automatically switch off after
90 seconds and the laser distance meter after 180 seconds.
8
9
10
11
12
7
7
13
14
15
-
+
+
-