Hauff-Technik MSH Basic-FUBO-E-SR4 Montageanweisung Seite 35

MSH Basic-FUBO-E-SR4 / MSH Basic-MBK-R4
► Positioned and stable MSH Basic-FUBO-E-SR4 mount-
ed vertically, aligned with the batter board and fi lled
with sand (see Fig.: 20).
IMPORTANT!
No sealing due to incorrect preparation of installation!
Incorrect preparation can result in damage.
• The upper edge of the fi nished fl oor always has to be above the red marking.
• In buildings without a fl oor structure the red frame corresponds to the upper edge of the
unfi nished fl oor. The basic unit is shortened by removing the individual compensation
frames; this is only possible up to the red marking (the compensation frame with the
red marking may not be removed). Later reworking is not applicable if the upper edge
of the basic unit is aligned with the upper edge of the fi nished fl oor.
► Concreted basic unit MSH Basic-FUBO-E-SR4.
Legend for Fig.: 21
1 Finished fl oor height
Art. Nr.: 5090032065 Rev.: 03/2018-09-25
1
EN
Fig.: 20
Fig.: 21
35