General Information And Intended Use; Safety; 4�1 Explanation Of Symbols - Hauff-Technik MSH Basic-FUBO-E-SR4 Montageanweisung

MSH Basic-FUBO-E-SR4 / MSH Basic-MBK-R4
3

General information and intended use

According to their intended use, our products have been designed exclusively for installation in buildings
made from state-of-the-art construction materials. We do not accept liability for use deviating from or
beyond this unless our express written confirmation has been obtained in advance.
For warranty conditions, please see our current General Terms and Delivery Conditions.
Multi-line building entry systems MSH Basic-FUBO-E-SR4 with the seal inserts MSH Basic-MBK-R4 meet
the requirements of Annex B1 of Test Specification VP 601 dated January 2008 and are compatible with
gas building entries which likewise comply with Supplement B1 in terms of design and construction.
For the collective feeding in and sealing of all supply lines (power, water, telecommunications, gas) in
buildings without a basement. Suitable for application areas such as standing seepage water, pressurised
water, stress class 1 waterproof concrete, DIN 18533 W1.1-E.
4

Safety

This section provides an overview of all the main safety aspects for optimum protection of personnel
and a safe installation process.
If there is a failure to observe the instructions and safety information set out here, this may result in
significant hazards.
When installing the multiple-service building entry MSH Basic-FUBO-E-SR4/ MSH Basic-MBK-R4, it is
imperative to observe the relevant professional association rules, the VDE provisions, the relevant na-
tional safety and accident prevention regulations and your company's guidelines (work and procedure
instructions).
The fitter must wear the relevant protective clothing.
Only intact components may be installed.
4�1 Explanation of symbols
1
Work stages
►
Effect/result of a work step
1
Reference numerals in drawings
Art. Nr.: 5090032065 Rev.: 03/2018-09-25
EN
23