Description Msh Basic-Fubo-E-Sr4 / Msh Basic-Mbk-R4; Required Tool And Auxiliaries - Hauff-Technik MSH Basic-FUBO-E-SR4 Montageanweisung

MSH Basic-FUBO-E-SR4 / MSH Basic-MBK-R4
8

Description MSH Basic-FUBO-E-SR4 / MSH Basic-MBK-R4

Legend for Fig.: MSH Basic-FUBO-E-SR4 / MSH Basic-MBK-R4
1 MSH Basic-MBK-R4 seal insert
2 MSH Basic-FUBO-E-SR4 basic unit with compensation frame
3 3-ribbed seal
4 Spiral hose KES with locking sleeves
5 Marking: "Range which can be shortened"
6 Marking: "Upper edge unfinished floor height"
7 Water barrier flange
8 Installation fixture, height-adjustable
9 Wing screw
10 Ground spike
9

Required tool and auxiliaries

For proper installation of the multiple-service building entry MSH Basic-FUBO-E-SR4/
MSH Basic-MBK-R4, the usual standard tools are required.
In addition:
– Torque wrench 1/4"+ Internal hex socket wrench 6 mm
(e.g. Hauff MSH/GEH tool set)
– Lubricant (GMT Art. No. 2790009100 or GML Art. No. 1591000754)
5
6
7
8
9
10
Art. Nr.: 5090032065
1
2
3
4
Rev.: 03/2018-09-25
EN
Fig.: MSH Basic-FUBO-E-SR4
MSH Basic-MBK-R4
27