DeVilbiss Cobra 2 Bedienungsanleitung Seite 2

Read and follow all instructions and Safety Precautions before using
CHARACTERISTICS
This automatic spray gun complies to ATEX regulations 94/9/EC, protection level II 2 G X, suitable
to use in Zones 1 & 2.
This Cobra 2 is a production spray gun suitable for use with automatic and semi-automatic
machines in conventional, HVLP or Trans-Tech applications.
Cobra 2 has a ¼ turn Quick detachable device, so to reduce maintenance & set up time (SMED).
To handle a wide range of coating materials the fluid passages are manufactured from high grade
stainless steel.
This spray gun is supplied with an indexed air cap. You can leave your air cap capable of free
rotation by removing the indexed plastic ring which is located by 2 pins on the air cap.
Pressure feed material supply can be re-circulating or direct.
The needle adjustment knob has 18 ratchet positions, allows fine and accurate fluid flow control.
SPECIFICATIONS & MATERIALS OF CONSTRUCTION
Fluid inlet & recirculation
Air inlet (Atom+Fan)
Cylinder/trigger
Maximum temperature in use
Spray gun weight
Gun body
Tip / Needle / Spray head/ Base plate
EC Declaration of Conformity
We, ITW Finishing UK, Ringwood Rd, Bournemouth, Dorset, BH11 9LH, UK, as the
manufacturer of the Spray gun model COBRA , declare, under our sole responsibility that the
equipment to which this document relates is in conformity with the following standards or other
normative documents:
BS EN 292-1 PARTS 1 & 2: 1991, BS EN 1953: 1999; and thereby conform to the protection
requirements of Council Directive 98/37/EEC relating to Machinery Safety Directive, and;
EN 13463-1:2001, council Directive 94/9/EC relating to Equipment and Protective Systems
intended for use in Potentially Explosive Atmospheres protection level II 2 G X.
ITW Finishing Systems and Products reserve the right to modify equipment specification without prior notice.
Operation Manual
Cobra 2 Automatic Spraygun
Important
this equipment
"P"
"A" "F"
"Cyl"
B. Holt, General Manager
th
24
Thread
1/8 BSP
1/8 BSP
1/8 BSP
40° C
950 gms
Aluminium hard anodized
Stainless steel 303
April 2007
2
Pressure
Max 7 Bars
Max 7 Bars
4 to 7 bars