Getting Started; Switching The Speaker On; Establishing The Wi-Fi Connection - Silvercrest SMRS 18 A1 Bedienungsanleitung Und Sicherheitshinweise

SilverCrest SMRS 18 A1
Location / application
The speaker is standing freely at the
height of the listener's head, minimum
clearance to all walls 0.8 m
- The speaker is standing freely
in a very large room.
- The speaker is placed in a
corner or directly in front of a
wall.
- Wall-mounted speaker
- The speaker is not at the
height of the head.
- The room is acoustically
attenuated by curtains and
carpets, for example.
- The speaker is placed in a
room with large reflective
surfaces like windows,
plastered walls and tiled
floors.
- The speaker is placed in the
middle of a closet/table
If you cannot obtain satisfactory results with the default sound settings, you can also adjust the bass
and treble manually.

Getting started

Switching the speaker on

Connect the speaker to the supplied power adapter (B) and then connect the power adapter (B) to
an easily accessible power socket. Toggle the power switch (12) located on the back panel of the
unit to "ON". The speaker is now in standby mode. The LEDs are off. There is no Wi-Fi connection.

Establishing the Wi-Fi connection

There are 2 ways to connect the speaker (A) to the existing network of your router via Wi-Fi: either
by pressing the WPS / Reset button (7) or by downloading the " SilverCrest Smart-Audio " control
app for free from the Apple
establishing the connection for the first time, make sure to place the speaker (A) as close as
104 - English
Recommended
sound setting
NORMAL
BASS BOOST
LOW BASS
TREBLE BOOST
LOW TREBLE
®
App Store or from the Google
Effect
Factory-default
configuration
optimum location
Slightly amplified bass
Slightly attenuated bass
Slightly amplified treble
Slightly attenuated
treble
®
Play Store. In both cases, when
for