Compatible Products - Nibe POOL 40 Installateurhandbuch

English
NOTE
This symbol indicates danger to person or ma-
chine .
Caution
This symbol indicates important information
about what you should consider when installing
or servicing the installation.
POOL 40 is an accessory that enables pool heating in
your climate unit.
The reversing valve (QN19) is connected to control a
part, or all, of the heating medium supply to a pool ex-
changer. The reversing valve or, if required, the reversing
valves (although with the same control signal), is/are
installed on the heating medium circuit that normally
goes to a radiator system. In systems with a cascade
connection, you determine in the control system how
many compressors are permitted to work with pool
heating. External circulation pump (GP10) to the climate
system must be installed if one or more pools are
docked to the system.
During pool heating, the heating medium is circulated
between the heat pump and the pool exchanger using
the heat pump's internal circulation pump. An external
circulation pump (GP9) circulates the pool water
between the pool exchanger and the pool.
The external circulation pump (GP10) circulates the
heating medium water in the climate system, and the
additional heat can be engaged as necessary, at the
same time as the external supply temperature sensor
(BT25) continually meters the heating demand of the
house.
The heat pump controls the reversing valve (QN19), pool
circulation pump (GP9) and any heating circuit circulation
pumps (GP10) via POOL 40.
Up to two different pool systems can be connected to
the F1345/F1355 or SMO 40 and be controlled individu-
ally, although this requires two POOL 40 accessories.
POOL 40 | GB

Compatible products

• F1145
• F1155
• F1245
• F1255
Contents
1 x Actuator reversing valve
1 x Shuttle valve
1 x Kit for accessory card
2 x Heating pipe paste
1 x Aluminium tape
1 x Insulation tape
2 x Temperature sensor
4 x Cable ties
Component location
unit box (AA25)
AA5-S2
AA5-X4
AA5 AA5-X2 AA5-F1
ELECTRICAL COMPONENTS
AA5 Accessory card
FA1 Miniature circuit-breaker
X1 Terminal block, power supply
Designations according to standard EN 81346-2.
• F1345
• F1355
• SMO 40
FA1
AA5-X9 X1
13