General Information; Operation; Safety Instructions; Structure Of Safety Instructions - STIEBEL ELTRON DCE 11/13 Bedienung Und Installation

oPERATIoN

general information

- The power cable must only be replaced (for
example if damaged) by a qualified contrac-
tor authorised by the manufacturer, using an
original spare part.
- Secure the appliance as described in chapter
"Installation / Installation".
- Observe the maximum permissible pressure
(see chapter "Installation / Specification / Data
table").
- The specific water resistivity of the mains
water supply must not be undershot (see
chapter "Installation / Specification / Data
table").
- Drain the appliance as described in chapter
"Installation / Maintenance / Draining the
appliance".
www.stiebel-eltron.com
oPERATIoN
1. General information
The chapter "Operation" is intended for appliance users and qual-
ified contractors.
The chapter "Installation" is intended for qualified contractors.
Note
Read these instructions carefully before using the appli-
ance and retain them for future reference.
Pass on the instructions to a new user if required.
1.1

Safety instructions

1.1.1 Structure of safety instructions

KEYWORD Type of risk
Here, possible consequences are listed that may result
from failure to observe the safety instructions.
f Steps to prevent the risk are listed. f
1.1.2 Symbols, type of risk
symbol Type of risk
Injury
!
Electrocution
Burns
(burns, scalding)
1.1.3 Keywords
KEYwoRD Meaning
DANGER Failure to observe this information will result in serious
injury or death.
WARNING Failure to observe this information may result in serious
injury or death.
CAUTION Failure to observe this information may result in non-seri-
ous or minor injury.
1.2

Other symbols in this documentation

Note
Notes are bordered by horizontal lines above and below
the text. General information is identified by the adjacent
symbol.
f Read these texts carefully. f
DCE 11/13| DCE 11/13 RC| DCE 11/13 H | 21