Operating The Cooling Device Safely - Dometic CF 11 Bedienungsanleitung

CoolFreeze
•
Food may only be stored in its original packaging or in suitable
containers.
A
NOTICE!
•
Check that the voltage specification on the type plate corresponds to
that of the energy supply.
•
Only connect the cooling device to a DC power supply in the vehicle
with the DC cable.
•
Only connect the cooling device as follows:
– With the DC connection cable to a DC power supply in the vehicle
– Or with the AC connection cable to an AC power supply
•
Connect the cooling device with an AC connection cable to the AC
power supply.
•
Never pull the plug out of the socket by the cable.
•
If the cooling device is connected to a DC outlet: Disconnect the
cooling device and other power consuming devices from the battery
before connecting a quick charging device.
•
If the cooling device is connected to a DC outlet: Disconnect the
cooling device or switch it off when you turn off the engine. Otherwise
you may discharge the battery.
•
The cooling device is not suitable for transporting caustic materials or
materials containing solvents.
•
The insulation of the cooling device contains flammable cyclopentane
and requires special disposal procedures. Deliver the cooling device
at the end of its life-cycle to an appropriate recycling center.
2.2

Operating the cooling device safely

!
CAUTION!
•
Before starting the cooling device, ensure that the power supply line
and the plug are dry.
A
NOTICE!
•
Do not use electrical devices inside the cooling device unless they are
recommended by the manufacturer for the purpose.
•
Do not place the cooling device near naked flames or other heat
sources (heaters, direct sunlight, gas ovens etc.).
EN
Safety instructions
7