Troubleshooting; Environmental Protection - Lightmaxx VECTOR Spot 200 Bedienungsanleitung

Troubleshooting:

The following overview is intended as an aid to rapid troubleshooting. If you are unsure,
contact the manufacturer, the dealer or appropriate specialist personnel. Never open the
device by yourself!
No function
No reaction in DMX mode
Cleaning:
Regular cleaning of the device from impurities and dust increases the shelf life of the product. Always
disconnect the device from the power supply while cleaning it Optical lenses should be cleaned with
a dry microfiber cloth. This will also optimize the light output. Never clean the device wet! Ventilation
grilles and openings should always be cleaned of dust and dirt. Compressed air sprays are ideal for this
application.

Environmental protection:

The company Music Store professional GmbH always strives to reduce the burden of packaging to a mi-
nimum. The use of environmentally friendly and recyclable materials is always of elementary importance.
Please return the packaging for recycling after use:
32
Note! (Error during data transmission)
Never connect the DMX input or output to audio devices!
DMX cables enable trouble-free operation and the highest possible trans-
mission reliability of signal data. Do not use microphone cables.
Symptom Troubleshooting
Check the mains connection and its fuse.
Check the cable connections.
If available, try an alternative DMX controller.