Lightmaxx VECTOR Spot 200 Bedienungsanleitung Seite 22

Commissioning.
All connections of the device should be made before switching on. Only use high-quality cables that
are as short as possible for the connections.
Configuration of the DMX connector:
DMX operating mode:
Connect the DMX input of your device to the DMX output of your DMX controller, your DMX soft-
ware or the DMX output of a device already in your DMX chain. Always use a DMX cable with a
110 Ohm resistor for this connection. Address the device according to your DMX configuration. The
following tables show the respective DMX modes of the individual devices with the corresponding
values and functions:
6 channel mode:
Channnel
1
2
3
4
5
22
DMX value:
000-255
000-255
000-255
000-004
005-250
251-255
000-007
008-047
048-087
088-127
128-167
168-207
208-247
248-255
Function:
X
Y
Dimmer (0-100%)
Shutter closed
Strobe effect / slow -> fast
Shutter open
Empty
Auto Play 1
Auto Play 2
Auto Play 3
Auto Play 4
Auto Play 5
Auto Play 6
Color Gobo sound control