Safety Instructions - Lightmaxx VECTOR Spot 200 Bedienungsanleitung

Safety instructions:

DANGER! (For babies and children)
Packaging, plastic foils and other packaging material is
to be properly stored or disposed of. It must be disposed of due to
risk of suffocation outside the reach of babies and children
to be kept in a safe place.
Make sure that children never use the appliance unattended! In addition,
make sure that children do not remove any (small) parts from the device,
as they could suffocate by swallowing them!
DANGER! (electric shock due to high voltages in the device)
Do not remove the housing. There are no parts to be serviced inside the
device. Inside the device there are components which are under high
electrical voltage.
The device must not be used as soon as damage or the absence of com-
ponents, protective devices or housing parts is noticed!
DANGER! (Electric shock due to short circuit)
Modifications to the mains cable or the mains plug are prohibited.
Failure to do so may result in fire or death due to electric shock!
WARNING! (High light intensity - eye injuries)
A direct view into the light source must be avoided at all times.
WARNING! (Epilepsy)
Stroboscopic effects (flashes of light) can cause seizures of epilepsy in
some people. Accordingly sensitive people are to be warned and should
avoid looking at such effects.
WARNING! (Risk of burns)
During operation, the device becomes very hot inside and on the housing
surface! After switching off the unit, wait at least 15 minutes before
starting any maintenance work.
NOTE! (Fire hazard)
Make sure that the device is not exposed to any direct heat source and
is used away from open fire. Never block or cover ventilation slots or the
device itself.
NOTE! (Operating conditions)
Due to its structural characteristics, the device is designed for indoor use.
Do not expose the device to rain, moisture or liquids, as this can cause
damage. Vibrations, dirt or sunlight can also lead to damage, avoid
them!
20