Troubleshooting - Lightmaxx vega shiggy Beam wash Bedienungsanleitung

Specifi cations
Model
Power Output
Mains voltage
LED Source
DMX Channels
Movement
Beaming angle
Control mode
Programme
Display
Dimensions
Weight

Troubleshooting:

The following overview is intended as an aid for troubleshooting. If you are unsure,
contact the manufacturer, the dealer or appropriate specialist personnel. Never open the
device by yourself!
Symptoms
No Function
No Reaction in DMX Mode
No Reaction from Remote
Control
If the above troubleshooting has not been successful, please contact our service staff.
You can fi nd the contact details at www.musicstore.de.
Cleaning:
Regular cleaning of the device from dirt and dust increases the shelf life of the product.
Always disconnect the unit from the power supply while cleaning it. Optical lenses should
be cleaned with a dry microfi ber cloth. This also optimises the light output. Never clean the
device with water! Ventilation grilles and openings should always be free of dust and dirt.
Compressed air sprays are ideal for this application.
26
Shiggy Beam Wash
70 Watt
240V 50/60Hz
Beam:1x10 Watt RGBW LED, Wash
17 channel/23 channel
Pan/Tilt X-axis: 540°, Y-axis endrolstation
Beam 3°, Wash 25°
DMX 512, Master-Slave, Autorun, Sound 2 Light
8 Intern, Sound 2 Light per DMX
LED Display
325 x 250 x 270mm
2,5kg
Warning! (Fault during data transmission)
Never connect the DMX input or output to audio devices such as power
amplifi ers or mixing consoles!
DMX cables enable interference-free operation and the highest possible
transmission reliability of signal data. Do not use microphone cables.
Troubleshooting
Check the network connection and its fuse.
Check the cable connections
If available, try an alternative DMX controller
Change the battery in your remote control
Make sure that the IR transmitter and receiver are within
a short and clear distance of each other.