Handlebar - GAS GAS enducross EC 2008 Betriebsanleitung

Chain Guide Slider
Visually inspect the upper and lower chain slider at the location of
the swingarm. If damaged or worn, replace it with a new part.
(A)
Pinion Teeth, Pinion Sprocket and Sprocket Wear
Visually inspect the pinion teeth. If they are worn or damaged, replace
the the pinion or the sprocket.
Lubrication
Lubrication is necessary after riding through rain or in the mud, or
any time that the chain appears dry. A heavy oil is preferred to a
lighter ol because it will stay on the chain longer and provide better
lubrication.
(B)
(A). Chain Guide Slider.
(B). Swingarm.
Apply oil to the sides of the chain rollers for better oil penetration.
Wipe off any excess oil.

HANDLEBAR

To suit various riding positions, the handlebar position can be adjusted
front to rear.
Handlebar position adjustment
Loosen the handlebar holder (A) screws (B), turn the handlebar and
place it in the desired position.
29
- -
(A). Apply oil.