Selecting A Mode; Switching Slow Start On And Off - Nevadent NSZBK 600 A1 Bedienungsanleitung

8.2 Selecting a mode

The toothbrush has 2 different modes. To switch between modes,
the toothbrush must be switched off.
- Mode with low pulsation, left LED 15,
- Mode with high pulsation, right LED 14.
1. Remove the toothbrush 9 from the battery charger 7.
2. Press the mode switch 10 to change the mode. The active
mode is indicated by the LED 14 or the LED 15.

8.3 Switching slow start on and off

1. Place the toothbrush 9 onto the battery charger 7.
2. Press the on/off switch 11 until you hear an acoustic signal.
- one acoustic signal: the function is being switched off.
- two acoustic signals: the function is being switched on.
40
GB