Parts Identification; Wrr-855S; Power Switch; Lcd Panel - Sony WRR-855S Bedienungsanleitung

Parts
Identification

WRR-855S

BTA-801 (not supplied)
WRR-855S
a POWER switch
Turns the power on or off.
b CH (channel selection) button
Press and hold down for at least three
seconds to go to the channel group selection
1
mode and the channel group number flashes
on the display.
2
3
For details, see "Settings" on page 11.
4
c GP (channel group selection) button
5
Press and hold down for at least three
6
seconds to go to the channel selection mode
and the channel number flashes on the
display.
7
For details, see "Settings" on page 11.
d LCD panel
8
When you turn on the power, the version
9
number of your WRR-855S ("U62," for
0
example) appears, then the tuner unit goes
to normal display mode.
qa
qs
The group/channel indications (C) for
U62 model are shown.
A RF (radio frequency) input level
indications
The number of dots shows the RF input
level as follows.
qd
Four dots on: more than 30 dBµ
Three dots on: between 25 dBµ and 30 dBµ
qf
Two dots on: between 20 dBµ and 25 dBµ
One dot on: between 10 dBµ and 20 dBµ
qg
No dot: less than 10 dBµ

Parts Identification

7