Location Of Parts And Controls; Front Panel; Power Switch; Display - Sony WRR-801A Bedienungsanleitung

Location of Parts and Controls

Location of Parts and Controls

Front Panel

1 POWER switch

2 Display

BATT
RF
ON
SET
OFF
POWER
4 SET button
1 POWER switch
Turns the power on and off.
2 Display
Displays the status of the tuner and the group and
channel assigned to the unit.
For details, see the following section "Display".
3 GP (group) button
Press to change the group or to display frequencies.
Display
1 BATT indicator
2 RF indicator
3 AF indicator
4 AF indication
BATT
AF
RF
AF
GP CH
1 BATT (battery) indicator
5 BATT (battery) indication
Indicate the condition of the wireless microphone
transmitter batteries. The indicator and indication start
flashing about one hour before the transmitter batteries
go flat.
4 EN
3 GP button
1 2
GP
AF BATT
CH
GP CH
5 CH button
5 BATT indication
BATT
6 GP/CH indication
7 RF indications
3 4 5
6 Blank panels
4 SET button
Press to change the group or channel.
5 CH (channel) button
Press to change the channel in a group.
6 Blank panels
Remove these panels to install optional WRU-801A
UHF Synthesized Tuner Units.
2 RF (radio frequency) indicator
7 RF (radio frequency) indications
The indicator lights and the indications (dots) appear
when the antenna reception is optimal. Depending on
the RF input level, the number of dots changes.
3 AF (audio frequency) indicator
4 AF (audio frequency) indication
The indicator lights and the indication appears when
the audio output level is higher than the reference level.
6 GP/CH (group/channel) indication
Shows the reception channel group and respective
channel number.
Pressing the GP button changes this indication to the
frequency indication.
6