Assembly - Jet JTSS-1600 Gebrauchsanleitung

For packing reasons the machine is not completely assembled.
5.2 Assembly
If you notice any transport damage while unpacking, notify your
supplier immediately. Do not operate the machine!
Dispose of the packing in an environmentally friendly manner.
Clean all rust protected surfaces with a mild solvent.
Some machine components are heavy. Get help from a second
person.
Mounting Rear Extension Table:
Attach rear extension table (to the machine table and put surfaces
in level with help of screws (U, Fig 5).
Attach the diagonal support beam (Fig 6).
Fig 4
Fig 5
Mounting Right Extension Table.
Attach right extension table to the machine table and put surfaces
in level (Fig 7).
The right table extension has an adjustable support leg (R).
Info:
Table alignment can be achieved quickly, by tapping it with a block
of wood (Fig 8‐1).
Check that table surfaces and edges are aligned, then firmly
tighten the screws.
Install the hose support (A, Fig 8‐2) and the table support (B).
Fig 6
Fig 7
Fig 8‐1