Software Configuration - Velleman CAMIP4 Bedienungsanleitung

• Click < Back to change settings or Next > to start the installation.
• If Framework 2.0 (or higher) was already installed, a message is displayed. Click OK to continue
installation of the CamView software.
• The Installation Finished window appears. Click on Finish.

7. Software configuration

7.1 General
• To start the CamView software, locate the CamView icon on the desktop and click on it, or go to
Start → Programs → CamView.
17/07/2009
CAMIP4
5
Rev. 02
© 2008 Velleman nv