Operation; Reception Of Dcf Radio Signal; Setting The Time / Date / Month / Year Manually; Displaying Universal Time - Auriol Z29620A Bedienungs- Und Sicherheitshinweise

Operation

Operation

Reception of DCF radio signal

The radio-controlled clock automatically starts to
search for the DCF radio signal. The radio icon
on the LCD indicates that the clock is searching for
the radio signal.
Note: Reception of the radio signal may be seriously
disrupted in reinforced concrete buildings (see
"Setting up Devices").
It is also possible to start reception of the DCF radio
signal manually on the clock.
Press and hold down the WAVE button
3 seconds. The radio-controlled clock attempts
to pick up the DCF radio signal. This process
takes a few minutes and is indicated by the
flashing radio icon
Note: If the radio-controlled clock cannot pick up
the DCF radio signal on account of an error or the
distance from the transmitter, etc., it is also possible
to set the time manually. As soon as reception of
the DCF signal is successful, the manual settings
are overwritten.
Setting the time / date /
month / year manually
1. Keep the WAVE button
3 seconds. The radio icon
2. Keep the WAVE button
approx. 3 seconds to interrupt reception of the
radio signal.
3. Keep the MODE button
2 seconds. The time zone display flashes. Press
the UP or DOWN button
18
required time zone.
Note: The default setting of the time zone (00)
is GMT+1. Calculate the required time zone from
this.
4. Confirm your setting by pressing the MODE
button . The hours display flashes. Press the
22
36 GB/MT
2
for
21
on the LCD.
2
pressed for approx.
21
flashes.
2
pressed again for
21
pressed for approx.
22
to set the
17
UP or DOWN button
18
hour.
Tip: If you keep the UP
pressed, the settings are made faster. You can
also use this fast setting option for subsequent
settings. If you do not press any button for
60 seconds, the LCD automatically reverts to
the standard display.
5. Confirm your setting by pressing the MODE
button . The minutes display flashes.
22
6. Repeat steps 4 and 5 to set the minutes, year,
month and date
9 10

Displaying universal time

Note: The display showing the names of the
towns and times will appear in the LC display in
place of the day of the week display
display and date display
9
Press the MODE button
Press the MODE button
for two seconds. The name of the town and the
time will flash.
Press the buttons UP
18
select the town you wish to have.
Note: You can manually change individual
towns to daylight saving time - even if they do
not officially have daylight saving time.
Press and hold down the UP button
prox. 2 seconds to set the town in question to
daylight saving time if necessary. The local
time in question will be moved forward by one
hour or put back by one hour.
Note: The following towns do not have any
official daylight saving time:
Cities Dis-
play
1 Alaska AL
2 Honolulu HN
3 Vancouver VA
4 Los Angeles LA
5 St. George SG
6 Chicago CH
to set the required
17
or DOWN button
18 17
.
, month
8
.
10
briefly three times.
22
and hold it down
22
or DOWN to
17
for ap-
18
UTC Summer /
Winter Time
–9 Manual Set ±1H
–10 Manual Set ±1H
–8 Manual Set ±1H
–8 Manual Set ±1H
–7 Manual Set ±1H
–6 Manual Set ±1H