Operation; Reception Of Dcf Radio Signal; Changing Basic Settings; Using The 12 / 24-Hour Display - Auriol HG00596 - IAN 271042 Bedienungsanleitung

Operation

Reception of DCF radio signal

The radio-controlled clock automatically starts to
search for the DCF radio signal. The radio icon
on the LCD indicates that the clock is searching for the
radio signal.
It is also possible to start reception of the DCF radio
signal manually on the clock.
Press and keep pressed the WAVE button
for longer than 3 seconds. The LCD radio-con-
trolled wall clock attempts to receive the DCF
radio time signal. This process takes several
minutes and is indicated in the LC display by
a flashing radio symbol
Note: If the radio-controlled clock cannot pick up
the DCF radio signal on account of an error, it is
also possible to set the time manually. As soon as
reception of the DCF signal is successful, the manual
settings are overwritten.

Changing basic settings

1. Press and keep pressed the WAVE button
approx. 3 seconds. The radio symbol
flashes.
2. Press and keep pressed the WAVE button again
for approx. 3 seconds to stop the reception of
the radio time signal.
3. Press and keep pressed the SET button
approx. 3 seconds. The acronym for the current
language flashes in the day of the week dis-
play .
9
4. Set the desired language by pressing the UP
or DOWN button
24
5. Confirm your settings by pressing the SET button.
The time display flashes.
6. Repeat step 4 and 5 to set the values for year,
month, day, hour, minute, time zone and DCF
ON / OFF.
13
19
.
for
19
13
for
26
25
.
The following languages are available:
GER = German
ENG = English
ITA = Italian
FRE = French
DUT = Dutch
SPA = Spanish
DAN = Danish
Hint: If you press and hold down the UP or DOWN,
you accelerate the process and reach the desired
value more quickly. This can also be used for setting
up the other functions in the following chapters.
Note: If the buttons are not pressed for approx.
20 seconds, it will automatically exit setting mode
and return to the normal time display.

Using the 12 / 24-hour display

While time display
UP button to switch between 12- hour and
25
24-hour format.
Note: The PM icon
for afternoons in 12-hour format.

Setting the alarm

Press the ALARM SET button
"A1" or "A2" will be displayed in the display.
Press and keep pressed the ALARM SET button
for about 2 seconds. The hour display flashes.
Press the UP or DOWN button
25
the desired value.
Press the ALARM SET button to confirm your
setting. The minute display flashes.
Press the UP or DOWN button to set the desired
minute value.
Press the ALARM SET button to confirm your
setting.
Press the SNOOZE button
alarm signal sounds. The alarm signal stops
sounding. The alarm will sound again 5 minutes
after the set waking time or alarm time.
Press any button except the SNOOZE button to
stop the alarm signal sounding.
is indicated press the
3
on the LCD stands
14
once or twice.
27
to set
24
as soon as the
18
GB/IE 15