Safety Notes - Monacor TVCCD-600COL Bedienungsanleitung

Please unfold page 3. Then you can always see the
operating elements and connections described.
1 Operating Elements and Connections
(fig. 1 and 2)
1 Jack for connecting a video signal controlled lens
(auto iris)
2 Fixing screw for correcting the mechanical focus
setting of the lens
3 Thread ring for mounting a lens with CS mount
thread
4 Adaptor ring for mounting a lens with C mount
thread
5 3-way DIP switch for the white balance
6 3-way DIP switch for adjusting the electronic
shutter
7 DIP switch for switching the back light compensa-
tion on/off
8 DIP switch for switching the aperture correction
on/off
9 DIP switch for switching the automatic gain con-
trol (AGC) on/off
10 Video output, 1 Vpp at 75 Ω
11 Operating indication
12 Power supply connection 12 V ,
center contact = positive pole

2 Safety Notes

•
This appliance corresponds to the directive for
electromagnetic compatibility 89/336/EEC.
•
The camera is designed for indoor use only. For
outside mounting the camera must be placed into
a weatherproof housing.
GB
11