Shark Evo-One Benutzerhandbuch Seite 5

move the helmet. If not, the hel-
met is too big for you; select
a smaller size. See figure
3. Grasp the back of the helmet at the
base and attempt to pull the helmet
off your head. Next, push the hel-
met upwards from beneath the chin
guard. You should push and pull with
relatively significant force. If the helmet
starts to come off, the helmet is too big
for you; select a smaller size.
4. Bend your head forward as far as
possible. The chin guard must not touch
your chest. See figure
5. Bend your head backwards as far
as possible. The helmet shell must not
touch your back.
Never wrap your hair inside the
helmet, or place anything in or on your
hair inside the helmet. Never insert
padding to modify the position of the
helmet on the head.
c
B.
C.
See figure D.
a helmet in yoUr siZe
If you have any questions about proper-
ly sizing your helmet, see your retailer
for assistance.
Each of these tests must be repeated
throughout the life of the helmet, as the
comfort padding may wear or change
over time. If, during the life of your hel-
met, your helmet does not maintain the
correct fit, you must replace the helmet.
Warning! Never lend your
helmet to others without insuring
a proper fit in accordance with these
instructions.
Warning! If you cannot obtain
a proper fit in accordance with
these instructions, DO NOT USE THE
HELMET. Select a different helmet size
or model.
Sizing (cm)
XS 53/54
S 55/56
M 57/58
L 59/60
XL 61
D
5