Board Description - Videotec VERSO Bedienungsanleitung

6.3 Board description

Connect the safety earth to the relative
terminal of the power supply connector.
The board may appear different to that
illustrated.
Depending on the product version, the
board may not be equipped with all
functions.
BOARD DESCRIPTION (VERSO, VERSO COMPACT)
Connector Function
J1 Camera power supply (V
Tamper switch contacts2
J2 Heater power supply (V
J3 Power supply for the board (V
J4 Auxiliary output (V
J5 Power supply connector/jumper5
J6 Fan power supply (V
SW1 Tamper switch2
Tab. 1
Different alternatives are available depending on the
1
version. V = 12Vdc o V
OUT
type of power supply installed (7.2.1 Camera power
supply installation, page 13). V
sings powered in 12Vdc or 24Vac, with jumper inserted
(J5).
Optional. Only available for VERSO housing.
2
From 100Vac a 240Vac, 24Vac o12Vdc.
3
Same voltage applied to power supply terminal of the
4
board (J3).
To install a power supply in 12Vdc or 24Vac refer to the
5
relative chapter (7.2.1 Camera power supply installa-
tion, page 13).
10
)1
OUT
)
OUT
)3
IN
)4
OUT
)
OUT
= 24Vac, in relation to the
OUT
= V , only for hou-
OUT IN
J2
J4 J3 J1
Fig. 3 VERSO.
J2
J4 J3 J1
Fig. 4 VERSO COMPACT.
J6 SW1
J5
J5
J6
MNVCHPVB_1746_EN