Manual Adjustment; Electronic Adjustment - Electrolux GA45SLV221 Benutzerinformation

Manual adjustment

Electronic adjustment

1. Press the on/off button to activate the
appliance.
2. Make sure that the appliance is in set-
ting mode. Refer to 'SETTING AND
STARTING A PROGRAMME'.
3. Press and hold touchpads (4) and (5) at
the same time until the indicators of
touchpads (3), (4), (5) and (6) flash.
4. Press touchpad (3).
• The indicators of touchpads (4), (5)
and (6) go off.
FILLING THE SALT CONTAINER
Turn the water hardness dial to the position
1 or 2.
• The indicator of touchpad (3) contin-
ues to flash.
• The acoustic signals operate. Exam-
ple: five intermittent acoustic signals
= level 5.
• The display shows the setting of the
water softener. Example:
5.
5. Press touchpad (3) again and again to
change the setting.
6. Deactivate the appliance to confirm.
CAUTION!
Only use dishwasher salt. Other
products can cause damage to the
appliance.
Water and salt can come out from
the salt container when you fill it.
Risk of corrosion. To prevent it, af-
ter you fill the salt container, start a
programme.
1. Turn the cap counterclockwise and
open the salt container.
2.
Put 1 litre of water in the salt container
(only for the first time).
3. Fill the salt container with dishwasher
salt.
4. Remove the salt around the opening of
the salt container.
5.
Turn the cap clockwise to close the
salt container.
ENGLISH 73
= level