Nuova Simonelli Aurelia Gebrauchanweisungen Seite 58

GRINDING CONTROL PROGRAM-
MING
The Aurelia Plus is equipped with an elec-
tronic system to control delivery times
according to the coffee grinding fineness.
• The display will read:
GRINDING
• By pressing the
above, it will read:
DELIVERY TIME
and in the line below, the current setting
DELIVERY TIME
SET
DELIVERY TIME
NOT SET
• Use the keys to change
the setting; use the
function without confirming, or press the key
to confirm.
• If the delivery time display reads:
DELIVERY TIME
SET
• then the sub-page for grinding control
values is skipped, to pass directly to the fol-
lowing page:
FAULTS HISTORY
If the delivery time display is on when a deli-
56
very is started - unless with the Continuous
function - the bottom line of the display will
show the delivery time (or times if more than
one unit is delivering).
Each group has an area of the bottom line:
the area on the left is for unit 1; the area
alongside it is for unit 2 and so on, until the
area on the far right, which is for unit 4.
The different areas are separated by vertical
bars; if a group is not delivering, the area is
key on the line
empty.
Here below is an example: unit 1 is delive-
ring (it has just started and 0 seconds have
passed); unit 2 has been delivering for 12
seconds and unit 4 is delivering (it has been
delivering for 21 seconds).
Area reserved to the
delivery time of unit 2
THURSDAY
key to quit the
Area reserved to the
delivery time of unit 1
If the time is confirmed:
the machine passes to the grinding control
value settings.
Area reserved to the
delivery time of unit 3
12:00
0 I 12 I I 21
Area reserved to the
delivery time of unit 4
DELIVERY TIME
NOT SET
• By pressing the key the display will
read as follows:
1 ESPRESSO 00-40
2ESPRESSO 00-40
where 00-40 indicates the maximum time (in
seconds) allotted for the delivery of a sam-
ple amount of coffee, equal to 10cc for a sin-
gle coffee and 30cc for a double coffee.
The first value will begin to flash on and off;
modify by using the
To confirm press the
• Press the key again to go on to the
next value.
To modify the previous value, proceed as
described above.
NOTE: If the system detects a delivery time (of
the sampled amount) inferior to the pro-
grammed minimum, the display will
read:
COARSE GRINDING
(See chapter called "MACHINE FUNC-
TION MESSAGES") which means you
have to adjust the coffee grinder to
reduce the grain.
If the system detects a delivery time
(of the sampled amount) superior to the
programmed maximum, the display will
read:
FINE GRINDING
keys.
key.