Cleaning The Appliance; Cleaning Accessories; Cleaning The Blender; Storage - Silvercrest SKMP 1300 B3 Bedienungsanleitung

NOTES
GB
► It is best to clean the appliance directly after
IE
use. This makes food residues easier to
remove.
► Processing foodstuffs containing strong pig-
ments, such as carrots, may cause staining of
the plastic parts. Such stains can be removed
using a little cooking oil.

Cleaning the appliance

■ Wipe the appliance with a damp cloth. For stub-
born soiling use a mild detergent on the cloth.
Wipe off any detergent residue using a cloth
moistened with clean water. Then carefully dry
the appliance.

Cleaning accessories

■ Clean the mixing bowl
blender lid
lid and the insets
with a small quantity of detergent. Any residues
can be removed with a washing-up brush. Rinse
all parts with clear, warm water and make sure
that all parts are dry before re-using them.
NOTE
► The insets
blender lid
also be cleaned using a dishwasher.
► If you clean them in the dishwasher, please
ensure that no plastic parts become trapped
under pressure between other objects. This
may cause them to become deformed.
► Wherever possible, place all plastic parts in
the top basket of the dishwasher.
10
, lid , filling nose
with measuring cup , drive unit
in warm water
, mixing bowl
with measuring cup

Cleaning the blender

WARNING! RISK OF INJURY!
► Do not touch the blade
■ Clean the blender
little mild detergent. Afterwards, rinse all parts
with clean water so that no detergent residues
remain.
In most cases, you can also achieve sufficiently
hygienic cleaning directly after use in the following
way:
1) Put some water containing a little detergent
into the fully assembled blender
2) Place the blender lid
onto the unit, making sure that the lip on the
lid
,
3) Switch on the blender
4) Pour out the washing water. Any residues can
be removed with a washing-up brush.
5) Afterwards, rinse out the blender
plenty of clean water, so that all detergent
residues are removed.
NOTE
► The blender
and the
a dishwasher.
can
► When cleaning the blender
washer, make sure that its plastic part is not
trapped between other objects. This may
cause it to become deformed!

Storage

■ Wind the power cable around the cable spool
for storage.
■ Store the cleaned appliance in a clean, dust-free
and dry place.
with bare hands.
in warm water with a
with measuring cup
seals the spout.
for a few seconds.
is suitable for cleaning in
SKMP 1300 B3
.
with
in a dish-