Troubleshooting; Storage; Disposal; Technical Data - Spring Raclette2+ Gebrauchsanweisung

10. Troubleshooting

Problem
The Raclette2+ does not heat up
Possible cause
1. No mains voltage
2. Active safety fuse (8) has blown
3. Internal defect
Solution
1. Insert the mains plug in a suitable socket. Make sure that the socket carries the
required voltage
2. Replace the active safety fuse (8) following the steps in Chapter 9 «Repairs».
3. Contact your sales or service office.
In the event of malfunction or if you have any questions, please contact your sales or
service office or speak directly to:

11. Storage

Keep the Raclette2+ in a dry place. Humidity and moisture may cause malfunction.

12 Disposal

At the end of the service life of the Raclette2+ it has to be disposed of properly. The
Raclette2+ contains electrical and electromechanical components. Comply with the
provisions of national law. When disposing of the Raclette2+ make sure that it cannot
be operated again by third parties.

13. Technical data

Description
Plug
Voltage
Frequency
Current consumption
Power output
Measurements L × B × H
Length of lead
module de base
Shock-proof (EU)
or Type 12 (CH)
230 VAC
50 Hz
1.52 A
350 W
262 × 115 × 132 mm
2 metres
Module de complément
none
230 VAC
50 Hz
1.52 A
350 W
262 × 103 × 132 mm
none
36