Important instructions for safety and
environment
For lamp replacement use
•
only lamp type indicated in
the Maintenance/Replac-
ing lamps section of this
manual.
WARNING! Do not connect
•
the appliance to the mains
until the installation is fully
complete.
With regards to the techni-
•
cal and safety measures to
be adopted for fume dis-
charging it is important to
closely follow the regula-
tions provided by the local
authorities.
The air must not be dis-
•
charged into a flue that is
used for exhausting fumes
from appliance burning
gas or other fuels.
Do not use or leave the
•
hood without the lamp
correctly mounted due to
the possible risk of electric
shocks.
Never use the hood with-
•
out effectively mounted
grids.
The hood must NEVER be
•
used as a support surface
unless specifically indi-
cated.
Use only the fixing screws
•
supplied with the product
for installation or, if not
supplied, purchase the
correct screws type.
Use the correct length for
•
the screws which are iden-
tified in the Installation
Guide.
In case of doubt, consult
•
an authorised service as-
sistance centre or similar
qualified person.
WARNING! ailure to install
•
the screws or fixing device
in accordance with these
instructions may result in
electrical hazards.
Do not use with a pro-
•
grammer, timer, separate
remote control system
or any other device that
switches on automatically.
ENG
DE
DA
NO
SV
FI
13