Operating; Steps Before Using A New Stand; Protective Equipment - Husqvarna DS250 Bedienungsanweisung

Steps before using a new stand

• Please read the operator's manual carefully and make
sure you understand the instructions before using the
machine.
• This machine is designed for and intended for drilling
concrete, brick and different stone materials. All other use
is improper.
• The machine is intended for use in industrial applications
by experienced operators.
• Keep the workplace tidy. Disorder leads to accident risks.
• Also read the operating manual enclosed with the drill
motor and check that its performance is compatible with
the stand.
Always use common sense
It is not possible to cover every conceivable situation you can
face. Always exercise care and use your common sense.
Avoid all situations which you consider to be beyond your
capability. If you still feel uncertain about operating
procedures after reading these instructions, you should
consult an expert before continuing.
Do not hesitate to contact your dealer if you have any more
questions about the use of the machine. We will willingly be of
service and provide you with advice as well as help you to use
your machine both efficiently and safely.
Let your Husqvarna dealer regularly check the machine and
make essential adjustments and repairs.
All information and all data in the Operator's Manual were
applicable at the time the Operator's Manual was sent to print.
WARNING! Under no circumstances should
!
you modify the original design of the
machine without approval from the
manufacturer. Always use original spare
parts. Unauthorized modifications and/or
accessories may lead to serious injury or
death to the user or others.
8 –
English

OPERATING

Protective equipment

General
Do not use the machine unless you are able to call for help in
the event of an accident.
Personal protective equipment
You must use approved personal protective equipment
whenever you use the machine. Personal protective
equipment cannot eliminate the risk of injury but it will reduce
the degree of injury if an accident does happen. Ask your
dealer for help in choosing the right equipment.
!
!
!
Always wear:
• Protective helmet
• Hearing protection
• Protective goggles or a visor
• Breathing mask
• Heavy-duty, firm grip gloves.
• Tight-fitting, heavy-duty and comfortable clothing that
permits full freedom of movement.
• Boots with steel toe-caps and non-slip sole.
• Always have a first aid kit nearby.
Be careful as clothing, long hair, and jewellery can get caught
in moving parts.
WARNING! The use of products such as
cutters, grinders, drills, that sand or form
material can generate dust and vapours
which may contain hazardous chemicals.
Check the nature of the material you intend
to process and use an appropriate breathing
mask.
WARNING! Long-term exposure to noise can
result in permanent hearing impairment. So
always use approved hearing protection.
Listen out for warning signals or shouts
when you are wearing hearing protection.
Always remove your hearing protection as
soon as the engine stops.
WARNING! There is always a risk of crush
injuries when working with products
containing moving parts. Wear protective
gloves to avoid body injuries.