Problem Chart; Cleaning And Maintenance; Technical Specifications - Futurelight CP-256/32 Bedienungsanleitung

PROBLEM:
No power.
Cannot enter main menu.
The colour or gobo cannot
be saved in the Preset
Macro.
The program cannot be
edited.
The individual scenes are
not displayed when editing
a program.
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no servicable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.
Should you need any spare parts, please use genuine parts.
Should you have further questions, please contact your dealer.
Power supply:
Power consumption:
Number of control-channels: 256
Sound-control:
Sound-input:
Audio-sensitivity:
DMX 512-output:
Free chasers:
Dimensions (LxWxH):
Minimum mounting depth:
Weight:
All rights reserved (including those of translations in other languages). No part of this user manual
may be reproduced or changed without written permission from the publisher.
Please note: Every information is subject to change without prior notice. 09/02 ©

7. Problem chart

CAUSE:
The power unit is not connected.
Forgot code or wrong input.
The controller could not save the
settings.
The last scene has not been saved.
The Recall-button has not been
pressed.

8. Cleaning and maintenance

DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!

9. Technical specifications

230 V AC, 50 Hz ~
via 12-15 V DC, 500 mA power unit included in the delivery
6 W
either via ¼" Jack or built-in microphone
¼" stereo Jack
0.3 - 1 V
3-pin XLR-connector
32
483 x 176 x 105 mm
19" mounting dimensions with 4 u
90 mm
4 kg
Check the connection cable of the
power unit and any extension-cables.
Open the envelope with the Master
Code and follow the instructions.
Please enter the settings again and
save every projector individually.
Check if all scenes of the program are
available. Edit the program again and
save the last scene by pressing the
Enter-button.
Press the Recall-button in order to
display the saved scene.
37
REMEDY: